Plastic water-based ink in use to pay attention to matters:

1, Good printing equipment so that the surface temperature of the object to reach 60 degrees Celsius to 80 degrees Celsius between. Because the temperature table shows the temperature of the substrate surface drying temperature, which has a great relationship with the wind and so on. The same is 80 degrees drying temperature, different manufacturers of equipment factor speed is different. Oven outlet position can not blow down, so as to avoid the phenomenon of plug and so on.

2, Water-based ink printing to use shallow version, to improve the printing speed, to avoid water ripples. The lighter the printing plate, the thinner the ink layer on the substrate, the higher the printing speed. The thinner the ink layer, the higher the color density of the ink.

3, According to the amount of water-based ink can be used every day to dilute the same, so that consistency of viscosity, immediately add a new ink will not appear color. Printing speed, the depth of the plate to dilute. The lower the viscosity of the plate, the faster the printing speed.

4, Water-based ink poured in the ink tank, the rotating plate to play the role of mixing and dampening. Ink and ink, ink plug version and then turn the plate, can make the ink solution, eliminate the phenomenon of plug version. But the water-based ink is not dissolved, if the plug version will re-wash version, affecting the efficiency.

5, Printing, stop observation effect, can roll up, continue to turn the plate, try to shorten the printing plate stop time. Keep the plate in rotation.

6, Not used water-based ink back into the barrel, the seal. Wash the plate with water, such as ink is dry, with water can be cleaned. Appear soap can be used soap or volume cleaning.